Headlights Assembly For Chevrolet Silverado 1500 2500 3500 2007-2013

SKU: C116-091-B

Types: B
Price:
Sale price$595.09 CAD

Description

Feature:
1.A new pair of headlights from ours allow you to see the road in front of you clearly during the night and in any bad weather that may arise.
2.Gives you and your family safer nighttime driving.
3.Makes your car looks newer.
4.See road markings and traffic sighs better.
5.Driving at night can be a scary proposition - and it's even scarier if you can't see the road well.
6.A dim, cloudy, yellowed, or otherwise damaged or non-functioning headlight makes driving dangerous,not only is your own safety at risk, but the safety of others is as well.
7.Great Replacement or upgrade for factory headlights
8.Adjustment screws for high/low beam

Specifics:
Condition: 100% Brand New
Color: as you choose
Material: Plastic Housing / Polycarbonate Lens
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Left, Right
Manufacturer Part Number: GM2502280, GM2503280, 25962804, 25962805, 22853028, 22853027, 15912784, 25833679
Interchange Part Number: GM2502280,GM2503280,25962804,25962805
Other Part Number: 15912784, 25833679, 22853028, 22853027
Assembly Type:Composite
Housing Color:as you choose
Lens Color:as you choose
Low Beam Bulb Size:H11 Bulb (Bulb No Included)
High Beam Bulb Size:9005 (Bulb No Included)
Turn Signal Bulb Size:3157A (Bulb No Included)

Fitment:
For Chevr Silverado 1500 2007-2013 models only
For Chevr Silverado 2500HD/3500HD 2007-2014 models only
(For 2500HD/3500HD, Fit 2007 new body style & 2014 old body style models only)
*Not fit Chevrolet Silverado Classic 2007

Package Include:
1 Pair of Headlights (Driver & Passenger Side)

Note:
1.Please check whether this item can fit on your car before purchasing.
2.Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

TIPS:
Installation:
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly.

Adjustment:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The center lines of the headlights should not be any higher than 3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlight individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Test your results

Adjustment:
Condensation buildup inside a headlight assembly is normal, and it occurs for a number of reasons.Condensation does not mean that a headlight assembly is defective, After hot, pressurized air has worked its way out of the headlight through the vents, humidity can get drawn in from the outside. So, headlights that have been on during hours of driving become fogged on the inside because their cool temperature creates a low-pressure area that actually draws moisture in. To minimize condensation buildup inside the headlight, make sure any dust boots or covers are on tightly. Also make sure that the headlight vents are not blocked, which could prevent condensation from escaping.
If water collects inside your headlight to the point where puddles form, odds are you've got a crack in the headlight lens cover. Water can also leak in because of improper seals around dust boots where bulbs are inserted. If no cracks or holes are visible around the edges of the headlight, the problem could be the housing itself. If you can visibly locate a crack, it's best to repair it with sealant.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 15 reviews
80%
(12)
7%
(1)
7%
(1)
0%
(0)
7%
(1)
S
Sipho Rababalela

i did not receive my order

B
Barton Erickson
Satisfied

Fit great, looks good! Great price.

U
Usman Ahmed
Great service

I didn’t end up needing one of the items, but the customer service was really well. Products were as shown. Should function well

V
Vilo Petelo

Xenon HID Ballast Control Unit Module 955-631-194-02 For Porsche Cayenne 2008-2010 Generic

M
Morgan Amon
They look good

They definitely are not a direct fit.. as in you can expect a little fine tuning to get them in. The brackets are slightly inward so it takes some persuasive maneuvers to get them in.. as well on the passenger side I had to doctor up the locks that the bulbs twist in to.. haven't had the chance to try them out though as the truck is getting other work done to it .

You may also like

Recently viewed