Kawasaki FH 381 430 451 480 500 541 580 FS FX 481 541 600 59031-7002 59031-7011 Engine Charging Coil Stator

SKU: M550-A637

Price:
Sale priceR 949.09 ZAR

Description

Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
All products shipped are tested.

Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil

Replacement Part Number:
59031-7002
59031-7011

Fitments:
For Kawasaki FH381V
For Kawasaki FH430V
For Kawasaki FH451V
For Kawasaki FH480V
For Kawasaki FH500V
Ffor Kawasaki FH541V
For Kawasaki FH580V
For Kawasaki FS481V
For Kawasaki FS541V
For Kawasaki FS600V
For Kawasaki FX481V
For Kawasaki FX541V
For Kawasaki FX600V

Package Includes:
1x Charging Coil

NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 55 reviews
89%
(49)
5%
(3)
2%
(1)
0%
(0)
4%
(2)
J
John Nichols
Quick delivery

Much quicker than I expected

c
charles brooks

Stator 398-86617A20 86617A20 174-6617K1 Fits Mercury MANY 6-40HP 2cyl Motors Generic

P
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

A
Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

S
Steve Ringwood
Pulse coil is as shown

Arrived on time,
Tracking accurate,
Great price,

You may also like

Recently viewed