Magneto Generator Stator Coil For Kawasaki KVF300 Prairie 1999-2002 21003-1343 Generic

SKU: M550-A242

Price:
Sale priceR 1,181.09 ZAR

Description

FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
OEM Replacement Part Number: 21003-1343

Dimensions :
Interior diameter : 38mm / 1.49"
Exterior diameter : 101mm / 3.99"
Thickness : 11mm / 0.45"

Other specifications :
Number of wires : 5
Number of pins : 5
Number of plugs : 2
Number of fixation holes: 3

FITMENT:
Fits Kawasaki KVF300 Prairie 1999-2002

Magneto Generator Stator Coil For Kawasaki KVF300 Prairie 1999-2002 21003-1343 Generic


PACKAGE INCLUDED:
1x Generator Stator Coil

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Shipping:
Free Shipping
Delivery Time: 2-6 working days

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 54 reviews
87%
(47)
6%
(3)
2%
(1)
0%
(0)
6%
(3)
P
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

J
Jacob Noel-Bellefeuille
It’s broken

Just got it from the box and it’s damaged

A
Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

R
Renier Grove
Not received

I will rate it once I receive it

S
Sebastian

Fits and works 💪

Gasket wasn't that great when tightening it pushed out and pinched it self

You may also like

Recently viewed