Outboard Timing Coil Pulse Fit for Suzuki DT 150 200 225 Hp 98-2003 32160-92E20

SKU: M550-B022

Price:
Sale price$21.09 CAD

Description

Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.

Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil

Dimensions:
Height: 18.5mm
Length: 26mm
Width: 23mm
Bracket center to center: 29.2mm
Wires length: Approx.120mm

Other Specifications:
Number of wires: 2
Number of plugs: 1

PART NUMBER(S):
32160-92E20

Fitments:
Fit for Suzuki DT150 1998-2003
Fit for Suzuki DT200 1998-2000
Fit for Suzuki DT225 2001-2003

Package Included:
1x Pick up pulsar coil

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)

NOTE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.


Shipping:
Free Shipping
Delivery Time: 2-6 working days

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 52 reviews
90%
(47)
6%
(3)
2%
(1)
0%
(0)
2%
(1)
P
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

A
Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

S
Sebastian

Fits and works 💪

Gasket wasn't that great when tightening it pushed out and pinched it self

S
Steve Ringwood
Pulse coil is as shown

Arrived on time,
Tracking accurate,
Great price,

M
Malcolm Rinehart

Excellent

You may also like

Recently viewed