LIGHTING COIL Fit for YAMAHA 40HP 50HP OUTBOARD 1989-1994 # 6H5-85533-01-00 Generic

SKU: M550-A523

Sale price$29.09 CAD


Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
All products shipped are tested.

Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil

Reference Part Number:

Fit for Yamaha 25Q EOS/L 1990-1994
Fit for Yamaha 40 TL/UL(H)R 1994
Fit for Yamaha 40 MS/L/ULH 1991-1994
Fit for Yamaha 40 ETL/UL 1989-1994
Fit for Yamaha 40 PLR 1992-1994
Fit for Yamaha 40 PS/LR 1991
Fit for Yamaha 40 S/L/UL 1989
Fit for Yamaha K40J M(E/O)S/L 1993
Fit for Yamaha 40H M(E/O)S/L 1989-1994
Fit for Yamaha 50 M(W/E/T/H/O)S/L 1989-1994
Fit for Yamaha P50 S/L (PRO) 1989-1994
Fit for Yamaha 50D EMTOS/L 1989-1994
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)

Package includes:
1x Lighting Coil

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Free Shipping
Item location: Sydney Warehouse
Delivery Time: 3-6 working days

Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 54 reviews
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

Jacob Noel-Bellefeuille
It’s broken

Just got it from the box and it’s damaged

Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

Renier Grove
Not received

I will rate it once I receive it


Fits and works 💪

Gasket wasn't that great when tightening it pushed out and pinched it self

You may also like

Recently viewed