Alternator Stator Coil 8 Poles For Honda CRF250R 04-09 CRF 250 R 31120-KRN-670 Generic

SKU: M550-A277

Price:
Sale price$43.09 CAD

Description

FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number:
31120-KRN-670
31120-MEN-730
31120-MEN-731
31120-MEN-A11

Dimensions :
Interior diameter : 27mm / 1.08"
Exterior diameter : 60mm / 2.39"
Thickness : 16mm / 0.62"

Other specifications :
Number of wires: 4
Number of pins: 4
Number of plugs: 2
Number of fixation holes: 3

FITMENT:
For Honda CRF250 CRF250R 2004-2009
For Honda CRF450R 2005-2007
For Honda CRF450R 2008

PACKAGE INCLUDED:
1x Generator Stator Coil

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Customer Reviews

Based on 56 reviews
88%
(49)
5%
(3)
2%
(1)
0%
(0)
5%
(3)
J
John Nichols
Quick delivery

Much quicker than I expected

c
charles brooks

Stator 398-86617A20 86617A20 174-6617K1 Fits Mercury MANY 6-40HP 2cyl Motors Generic

P
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

A
Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

S
Steve Ringwood
Pulse coil is as shown

Arrived on time,
Tracking accurate,
Great price,

You may also like

Recently viewed