Pulsar / Pulsing Coil for Yamaha R1 YZF-R1 YZF-R1S YZF-R1M MT-10 FZ-10 2015-2020 Generic

SKU: M550-B014

Price:
Sale price$21.09 CAD

Description

FEATURES:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quantity: 1 PC
Type: Pick up pulsar coil

Dimensions:
Height: 24 mm
Length: 28 mm
Width: 24 mm
Bracket center to center: 50 mm
Wires length: Approx.250 mm

Other specifications:
Number of wires: 2

PART NUMBER(S):
B67-81410-00

VEHICLE MODELS FITMENT:
Fits Yamaha YZF R1 R1 2015-2020
Fits Yamaha YZF R1 R1M 2015-2020
Fits Yamaha YZF-R1 RaceBase R1 RaceBase 2015-2017
Fits Yamaha YZF-R1S R1S Limited Edition 2016-2017

Fits Yamaha MTN1000 FZ-10 2016-2017
Fits Yamaha MTN1000D MT-10 SP 2017
Fits Yamaha FZ10/ MTN1000 MT-10 2016-2017

Pulsar / Pulsing Coil for Yamaha R1 YZF-R1 YZF-R1S YZF-R1M MT-10 FZ-10 2015-2020 Generic
PACKAGE INCLUDED:
1 x Pick up pulsar coil

NOTICE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.

Shipping:
Free Shipping
Delivery Time: 2-6 working days

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 54 reviews
87%
(47)
6%
(3)
2%
(1)
0%
(0)
6%
(3)
P
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

J
Jacob Noel-Bellefeuille
It’s broken

Just got it from the box and it’s damaged

A
Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

R
Renier Grove
Not received

I will rate it once I receive it

S
Sebastian

Fits and works 💪

Gasket wasn't that great when tightening it pushed out and pinched it self

You may also like

Recently viewed