Full color function Reufrbished Printer Print Head fit for HP 3070 3520 5525 4620 5520 5510 CN688A

SKU: W002-D049~A~101wal

Price:
Sale price$28.09 CAD

Description


Reufrbished CN688A Printhead for Hp Officejet 688A,3070,3520,3525,4610,4615,4620,4625,5510,5514,5520,5525,6525,
Print Head for HP 3070 3520 5525 4620 5520 5510 4615

Feature:
Excellent performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
This is Aftermarket Replacement Item But Not Genuine.
OEM Part Number: CN688A

Compatible Models:
Refurbished Printhead
For HP Officejet 688A 5510 4610 4615 6525 3070 3520 3525 5525 4620 5514 5520 5510 4625 4615 6525 printer

Packing includes:
1 x 688A print head

Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.

2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.

3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.

4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.

Before you install this product, you need to pay attention to:
1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.
2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.
3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.
4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.
5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.
6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.


Reufrbished Printer Print Head fit for HP 3070 3520 5525 4620 5520 5510 CN688A


Shipping:
Free Shipping
Delivery Time: 2-6 working days

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems


Customer Reviews

Based on 56 reviews
20%
(11)
59%
(33)
11%
(6)
5%
(3)
5%
(3)
M
Melanie Andersonud
Printer heads work great

Easy to install, no smudging, colors appear as the original printer heads, price is great.

J
Jeffrey Tayloris
The service was excellent.

I ordered the set of printheads because the original black printhead had failed. I naturally replaced only the black and started a print operation, but the printer failed and returned error code 7500, which requires shipping the printer for repair. I reinstalled the printhead and tried printing a second time, which again failed. I contacted Walmart and soon received notice that a new set of print heads was on order, and when I checked, they had already shipped. This time the printer recognized the replacement printhead and is printing perfectly after I went through the alignment process. I was feeling some remorse about ordering refurbished printheads, but the way Walmart handled the problem couldn't have been better. I wouldn't hesitate to order this product again.

L
Lacey Chungwj
Excelente producto

Un producto de alta calidad y lo recomiendo totalmente y su precio muy competitivo.

G
Gregory Sullivanxr
Fixed my printer

I last purchased a printhead 6 1/2 years ago for this printer. I paid $135. It worked for 6 1/2 years. I had to clean it a couple of times. I mostly use non-HP ink. Lately, I have been getting a "printer or ink failure" message that I was unable to clear. I could not print with this message. So I bought this, installed it, and it solved the problem.

M
Matthew Doughertyns
I couldn't find this anywhere!

The item arrived on time and seems to be working well.

You may also like

Recently viewed