Stator Magneto For KTM 125 SX EXC 200 250 300 05-16 54839204000 2K-3 Version Generic

SKU: M550-A455

Price:
Sale price$82.09 CAD

Description

Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper winding, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

Specifications:
Condition: 100% Brand New
Quantity: 1 PC
Type: Generator Stator Coil

Dimensions :
Interior diameter : 29 mm / 1.14 inches
Exterior diameter : 84.3 mm / 3.31 inches
Pole's Thickness : 33.1 mm / 1.30 inches
Pole's Width : 21.3 mm / 0.83 inches

Other Specifications :
Number of wires: 6
Number of pins: 6
Number of plugs: 1(+2)
Number of fixation holes: 3
Number of poles: 8

PART NUMBER(S):
54839204000

Fitments:
THESE MODELS USE 3 DIFFERENT TYPE OF STATORS.
2K-1 (IGNITION ONLY), 2K-2 (AC ONLY) & 2K-3 (FULL DC).
THIS ONE IS THE 2K-3 (FULL DC) VERSION.
BEFORE BUYING PLEASE MAKE SURE YOUR BIKE USES THE 2K-3 (FULL DC)VERSION.
For KTM 125/200/250/300 2K-3 Version
For KTM 125 SX TYLA RATTRAY 2005
For KTM 125 EXC 2005-2016
For KTM 125 EXC SIX DAYS 2005-2016
For KTM 125 Factory Edition 2011/2015
For KTM 125 EXC CHAMPION EDITION 2010
For KTM 200 XC 2008-2009
For KTM 200 XC-W 2008-2012
For KTM 200 EXC 2005-2012
For KTM 250 EXC 2005-2007
For KTM 250 EXC SIX DAYS 2005-2007
For KTM 300 MXC 2005
For KTM 300 EXC 2005-2007
For KTM 300 EXC SIX DAYS 2005-2007
For KTM 300 XC 2006-2007
For KTM 300 XC-W 2006-2007
For Husqvarna TE 125 2015-2016
For Husaberg TE 125 2012-2014
For Husaberg TE 125 HQV 2014

Stator Magneto For KTM 125 SX EXC 200 250 300 05-16 54839204000 2K-3 Version Generic
Package Included:
1 x Generator Stator Coil

Notice:
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Shipping:
Free Shipping
Delivery Time: 2-6 working days

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 54 reviews
87%
(47)
6%
(3)
2%
(1)
0%
(0)
6%
(3)
P
Peter Mramor
Required tweaking...

Purchased it for my 2011 Suzuki DL650. As installed, it is running great, producing good voltage. Must mention though, not a simple plug'n'play: had to remove the wire retaining clip to get it properly seated... had to move the rubber grommet up the cable to create enough slack for proper seating inside the housing... fought with the rubber grommet to press it in the seating as it appeared a bit too large... had to modify the routing to compensate for the 2" too short cable. Still very happy as the low price outweighed the additional tweaks...

J
Jacob Noel-Bellefeuille
It’s broken

Just got it from the box and it’s damaged

A
Antonie Zaayman
Very good

Happy to get it now i must just pick it up at the post office

R
Renier Grove
Not received

I will rate it once I receive it

S
Sebastian

Fits and works 💪

Gasket wasn't that great when tightening it pushed out and pinched it self

You may also like

Recently viewed